Some boats feature internal mast furling or stow-away mainsails, a necessity due to their tall sloop rigs. For a variety of reasons, primarily related to inefficient main sail shape and equipment reliability problems, Shannon does not recommend internal mast furling mainsails. To give the same ease of handling as a stow-away system, the Shannon 43 can be equipped with the main halyard and continuous reefing lines lead aft to the cockpit. With the installation of an electric self-tailing winch, mast track and cars, full length battens, line stoppers and lazy jacks, raising the main and putting in reefs can all be accomplished from the cockpit with the same ease as a stow-away system. The Shannon reefing option has the advantage that if any component of the this system fails, the sail can still be lowered, and reefs put in the old fashioned way. However, stowaway mainsails are available at owner request.
Go to further discussion on singlehanded sailing in the Offshore Issue Section
Watch the video of the Shannon Pilot 43 and see how one person can raise and lower sails from the cockpit with ease!
Back to Shannon 53 HPS study plans
the notion that you need to consolidate the center of effort as the wind rises by reducing to a staysail.
The reasoning behind the rig tends to frustrate tradionalists unreceptive to how it improves upon either of the two schemes that comprise its name, but in a word, it works."
-Quentin Warren, SAILING, January 2000
Shannon Sail Technology
Because Shannon builds yachts for serious offshore sailing, the primary focus in rig design is optimizing performance and minimizing sail handling workloads without compromising safety. Just as custom designed layouts characterize the interior of every Shannon, the sail plan and rig of each boat are different based on the owner's requirements.
Shannon Scutter Rig
The Shannon Scutter rig offers a variation on the cutter/double headsail ketch theme. In 1994 Walt Schulz developed the Scutter (short for sloop/cutter to reflect the combination of the fore triangle plan of a double headsail sloop and the mainsail of a cutter) as an alternative rig for all Shannon models. On a conventional sloop, a 140% genoa cannot be reefed down with a roller furler to much less than 110% and still power the boat. A rolled up genoa loses its shape compromising its structural integrity, and consequently has no efficiency when reduced more than 30%. Roller furling a large genoa is no substitute for a true working jib in heavy winds. A single headstay boat requires a headsail change when winds increase creating dangerous foredeck work at the worst time. By contrast, the Scutter rig keeps the boat sailing well in a wide range of wind speeds, without putting the crew in harm's way making sail changes
The Scutter headsail arrangement has a conventional roller furling 120% to 150% genoa positioned at the stemhead, and four feet forward of that on the bow platform is another stay that accepts a working jib also on a roller furler. In less than 20 knots of wind, the boat is sailed just like a sloop, with main and full genoa. As the wind picks up, the genoa is rolled in 33% to a predetermined and reinforced position. With more wind, the genoa is fully furled and the working jib is rolled out. The jib can also be reduced by 33%. Also, if wind conditions dictate, there is a third removable stay that is attached on the foredeck for a storm jib in extreme conditions
Another feature of the Scutter rig is that the center of effort on the headsails moves forward as the sails are furled, which will reduce the weather helm typically encountered on other boats in the higher wind ranges. The Scutter rig also incorporates a mast head crane resulting in the relocation of the back stays further aft. This allows for 15% more roach in the fully battened mainsail, enabling the Scutter to sail to windward reasonably well without the use of headsails. By eliminating the dependency on large overlapping genoas the Scutter rig requires much less winch work sailing to windward than a sloop. The features of the Scutter can be combined with the addition of a fully battened mizzen for a Sketch rig, with endless possibilities for the cruising sailor.
Shannon Sketch Rig
The features of the Scutter rig can be combined with the addition of a fully battened mizzen for a Sketch rig, with endless possibilities for the cruising sailor.
Shannon Classic Ketch and Cutter Rigs
Shannons are rigged with double headsails for ease of handling and a variety of different sail combinations depending on the weather. The classic cutter rig has twin side-by-side forestays on the bow platform that can accommodate both a yankee and a large genoa either roller furled or conventionally hanked on.
Coming inboard, just aft of the actual stemhead is the staysail which is available either loose footed or on a self-tending club boom sheeted to the cockpit.
The staysail is an excellent heavy weather sail. Thus,three sails are carried forward of the mast ready to go as wind conditions change without having to drag a jib out of a cockpit sail locker. The twin headstays on the bow platform also allow for excellent wing-and-wing sailing with two jibs in the trade winds.
The ketch rig on a Shannon provides balance, versatility, and ease. It is a true ketch with a good sized mizzen, not a sloop with a broom stick stuck in the cockpit. The 18 different sail combinations with a double headsail ketch provide incredibly simple sail handling. The ketch essentially eliminates the need to reef the mainsail in most conditions. When the wind increases to over 20 knots, the mainsail is dropped rather than reefed, and the boat continues to make hull speed under a headsails and mizzen ("jib and jigger") combination. As the wind speed increases, sail area is reduced by reefing and then dousing the mizzen, without having to leave the safety of the cockpit. A ketch rig also allows for use of a mizzen staysail, the easiest to use of all the downwind and reaching light-weight spinnaker type sails. The efficiency of ketch rigs for circumnavigating in the tradewind belt has been best demonstrated by the victories of ketches in the recent Whitbread around the world races.
Copyright © 2006 -2009 Shannon Yachts.