Shannon 39 Scutter Rig
Shannon 39 Specifications

Builder Shannon Yachts, Bristol , Rhode Island

Designer Walter Schulz & Assoc.

Length on Deck 38' '7"
Length Overall 41' '7"
Length on Waterline 32' 10"
Beam 12'
Draft Fixed Keel 5' 6"
Draft Centerboard Up 4' 5"
Centerboard Down 7' 8"
Mast Bridge Clearance 58'
Displacement 18,700 lbs
Ballast 6,900 lbs
Displacement / Length 243
Ballast / Displacement Ratio 37%
Sail Area / Displacement Ratio 17.0


RIG
Owner's choice of classic headsail ketch, cutter, or with self-tending option Shannon Scutter rigs in cutter or ketch configurations

SAIL AREA
Double Headsail ketch 751 sq. ft.
Cutter 705 sq. ft.
Shannon "Scutter" rig 749 sq. ft.
Shannon "Sketch" rig 795 sq. ft.

SAIL PLAN MEASUREMENTS
I=45, E=17, P=40, J=17 EY=10, PY= 27

SAILMAKER
Owner's choice

CONSTRUCTION
Hand laid-up composite fiberglass one piece hull using linear PVC foam core, sandwich construction with vinylester resin and biaxial laminates. Internal all lead ballast (no keel bolts). One piece deck with closed cell foam core and biaxial laminates

CUSTOM INTERIOR LAYOUT
Owner's choice of cabins, salon, galley and single or dual head layouts. Choice of woods and hardware. Gloss interior and exterior varnish, 6 coats

TANKAGE
Specific tankages are determined based upon layout and the owner's preferences.

A typical 39 has:
Fuel 60 gals. in one tank
Water 100 gals. in two tanks
Waste 25 gals. in one tank

ENGINE
56 hp with a high output alternator, external regulator and four gel-cell batteries.

Please contact us to receive our complete standard features and sailaway equipment inventory.

CUSTOM INTERIORS GALLERY SPECIFICATIONS RIGS & SAILS DECK BACK TO 39